Supernova Rogue 8.5" LED Driving Lights (Pair) $589.00

Sold Out
Supernova Rogue 8.5" LED Driving Lights (Pair)
Supernova Rogue 8.5" LED Driving Lights (Pair)
rogue dimensions
Supernova Rogue 8.5" LED Driving Lights (Pair)
Supernova Rogue 8.5" LED Driving Lights (Pair)
171
172
173
174
Rogue-internals-banner
Supernova Rogue 8.5" LED Driving Lights (Pair)
Supernova Rogue 8.5" LED Driving Lights (Pair)
rogue dimensions
Supernova Rogue 8.5" LED Driving Lights (Pair)
Supernova Rogue 8.5" LED Driving Lights (Pair)
171
172
173
174
Rogue-internals-banner

Supernova Rogue 8.5" LED Driving Lights (Pair)

$589.00
/

  • Free Shipping - Orders over $89 in Australia

  • 30 Days Free Returns

Unmatched Volume, Unparalleled Build Quality

New Updated 5.5mm Stainless Bracket - Not pictured

Our popular, compact 6″ Quad light swiftly became iconic for its maximum light output and robust build quality, yet desire grew for a full sized, unrestricted variant. Born with the same DNA, the wheel didn’t need to be reinvented, but it has been turned up to eleven with 5W U.S.A CREE LEDs and distinctive daytime running lights. Zero dead spot output pattern is achieved with 36 high output  5W CREE LEDs consisting of 16x 5º hyper spot and 16x wide spread, highly polished reflectors.  Rogue 8.5 is designed as an all in one driving light solution.

In the past spot lights were for distance and light bars for flood, the Rogue has been designed as an all in one driving light solution with a 50/50 flood and spot reflector design which provides a wide spread coverage reaching over one kilometre, perfect for kangaroo spotting and next.


What's Included 

2 x Supernova Rogue 8.5 LED Driving Lights
2 x Stainless Steel Security Torx Mounting Kits

2x Vibration Isolation Gasket
1 x Fast Fit Dual Wiring Harness - Direct Install with a fully configured harness. Battery Terminals, Fuse, Relay, In Cabin Isolation Switch and H4 + HB3 high beam connections. 
Free Delivery 

Please Note: The Deutsch connector features 3 wires (2 for main beam, 1 for DRL), the DRL wire (yellow) can be connected to an auxiliary power source (eg. parkers) on your vehicle for day time functionality.
 

FEATURES

Side Day Time Running LEDs
IP69K Waterproof
Shatterproof GEs Lexan Lens*
Stainless steel fasteners and bracket (included)
Deutsch connector plug (4pin, Light power + DRL power)
DuPont non-fading midnight black finish
Lifetime Warranty
Combination Spot/Flood driving beam pattern
Boost LED driver
Anti theft bolts and tools included

Please note: Whilst DRL brightness has been increased, the output has some restriction to ensure glare at night time is not excessive. Customer feedback showed many users wired the DRLs in conjunction to the parker lights which are switched on with low beam headlights on most cars at night.

LENSGE Lexan Lens 3mm
LED CHIPSU.S.A CREE X-Lamp XTE 5W - Maximum Efficacy (lm/W) 178 lm/W - 32pcs Each
FINISHDuPont Midnight Paint
FASTENERS316L Marine Stainless With Torx Security Bolts
DRL2pcs Per Light (Sides) - COB LED
WATERPROOF RATINGIP69K
WARRANTYLifetime
1 LUX DISTANCE1020- Visible Distance up to 1.8km
INPUT VOLTAGE11-30V DC
INPUT CURRENTNominally 9.0A Each (+/- 5%)
LUMEN MAINTENANCELM-80 50,000 Hours
LUMENS24,000 (Pair)
INCLUDED WIRING HARNESS14 Gauge Dual DT Output, Negative and Positive switched headlight compatible
COLOUR TEMPERATURE6000K @ 87+ CRI

Renowned Build Quality - Unparalleled Output

CREE 5W XTE LEDs – Improved 1 Lux @ 1020M


  • Dialled up, Dialled in Efficiency 


    With many exaggerated power ratings and lumen outputs we are often asked; what is the input power? The important question is what is the total efficiency and light output. Power efficiency bottle necks from the weakest culprit, think LED driver, chip thermal efficiency, optical reflection coefficient, lens transparency, thermal management and we start to realise that input current does not paint the entire picture. The Rogue has been designed for total efficiency and not brute power.
     

    • 50/50 Spot/Flood Driving beam pattern
    • 90< % Efficient Boost LED Driver
    • 4 Stage thermal management with oversized cast heat sinks
    • High bin rate 5W CREE XTE LEDs
    • General Electrics Lexn Lens - over 200x impact resistance of glass with superior light transmittance 

  • Rugged Never Looked Better

    • Over, under and reverse current protection.
    • GE Lexan Lens - Non fading, virtually indestructible
    • 100% electromagnetic (EMC) and radio frequency interference (RFI) protected
    • IP69K 3200psi hot water jetting sealed and certified.
    • Gore breather valve - pressure equalisation, anti fogging.
    • Boost LED driver wide range 11-30V DC input.
    • Dupont high UV and abrasion resistive paint.
    • 316 Marine stainless steel bracket and fasteners.

     

  • Lifetime Warranty

     

    Over cracking, yellow fading lenses? Black anodised lights turning grey? Rogues maintain their look for years to come no matter the conditions. An Aussie backed life time warranty provides peace of mind, no matter the usage. This is only achievable with use of premium tier components and manufacturing techniques. Every detail has been accounted for and further exceeded. The virtually indestructible GE Lexan lens guarantees no discolouring or cracking after years of sun abuse, likewise the DuPont paint maintains a deep black finish for years to come.

  • IP69K  Waterproof Rating - Made To Last

    We set out to offer a driving light which is virtually impenetrable. The first step was replacing silicone glue sealing to a custom O- Ring seal. Silicone sealing offers initial protection, throw in dust, heat and pressure washing and over time they are susceptible to dry rot, cracking, shrinking and becoming static. Our solid O - Ring design utilises a polymer which flexes during heat variations and pressure changes whilst being firmly compressed into place with a 12 bolted front plate to maintain constant tension.The end result;  Surpassing standard IP69K rating of 1450PSI water jetting with a staggering 3200PSI at 80ºC. Give it all you’ve got and marvel as the light stands up to any weather condition.  

  • Wiring Harness, Anti Theft Bolts and Delivery Included.

    Direct Install with a fully configured ADR approved wiring harness. Battery Terminals, Fuse, Relay, In Cabin Isolation Switch and H4 + HB3 high beam connections. Negative and positive high beam switching compatible. 

  • Updated V4.0 Design

    Done away with the two small SMD LEDs per day time running light a new full size COB LED provides increased DRL brightness and visibility. A striking 6000K hyper-white light when illuminated, and solid yellow appearance when switched off. Updated bracket design brings a rigid approach to vibration reduction, featuring anti theft security torx bolts as standard.

  • See The Wider Picture. Go Rogue 

    Total lumen output does not always dictate better clarity. Rogue 8.5s feature high bin rate, U.S.A CREE XTE 5W LEDs which consistently emit an accurate 6000K colour temperature and a CRI of 87+. Partnered with a true driving light output configuration that consists of 50% flood reflectors, these Rogues are more of a flood light which reach leading distances than a convention spot light that narrowly focuses light to a centre spot to reach similar distance.

DON’T TAKE OUR WORD FOR IT!

4.9