Supernova Raptor Next-Gen 32" COMMANDER LED Light Bar Kit $269.10
Direct compatibility with the interior overhead rocker switch and high beam circuit on your raptor! Connect to the existing wiring loom in the engine bay and control the light bar from your headlight stalk - ADR Compliant.
Effortless - DIY Install.
Undisputedly the greatest factory wiring solution for aftermarket lighting systems on any vehicle, ever. Simply connect the input wires from the light bar to the existing outputs in the engine bay of your raptor with the included heat shrink for an effortless setup!
Custom mounting brackets included. BYO - 8mm socket and 10mm spanner.
5700K - Hyperwhite, Daylight.
With a slightly warmer colour temperature than the factory LED headlights, the Commander 32" provides excellent colour rendering with genuine Osram LEDs.
strategically positioned to promote optimal airflow. Through rigorous computational fluid dynamics (CFD) simulations, we've identified that not only is there an unhindered flow above the light bar, but a velocity augmentation occurs below it. Negligble airflow change ensures your Raptor is ready to conquer.
PRE-ORDER - SHIPS MID DECEMBER
Double Row 32" Light Bar With Brackets - Next-Gen Raptor Kit.
New Single Row Kit Available!
The Next Gen Raptor is equipped with the best LED headlights on a Ranger to date. However, with ADR lumen limits, there's still a lot to be desired for both lumen volume and distance, especially in higher speed, Baja conditions. Our solution? A bespoke kit to mount our renowned 32" Double Row Commander LED Light bar behind the grille, boasting a near four-fold lux increase with factory integration to the Auxillary switches.
This light bar promises a flawless fit on your Raptor without needing modifications or extra parts. For effortless installation, we've included a heat-shrink to connect the light bar directly to either channel 5 or 6 Auxiliary output in the engine bay. Command your lights from within the cabin with the built-in factory rocker switch.
We've adhered to ADR regulations: our light bar synchronizes with high beam when the Aux 5 or 6 switch is on while ensuring it stays off when the aux switch is not in use.
Experience Unmatched Brightness! Our intensive testing demonstrated that the factory high beam achieved 1900 peak lux. But, with the Commander 32" Light Bar in action, we witnessed a staggering rise to 7200 lux. That's a solid fourfold increase in brightness at any range, enhancing visibility and boosting your confidence while navigating the most challenging terrains.
Precision, Perfection, and Performance The journey to this innovation saw us create over a dozen bracket designs. Using state-of-the-art 3D scanning and printing technology, we insisted on ultra-fine fitment tolerances. We take pride in being the pioneers of integrating a double-row light bar onto the Raptor, all thanks to our relentless pursuit of perfection. Please note: The fitment is tight, with minor interference between the light bar and the grille. Nonetheless, all panels can be smoothly refitted, clipped into place, and fasteners reconnected with some components touching.
Exclusively designed by Supernova Lighting, this product is not affiliated or associated with Ford Motor Company.
- Commander 32" Double Row Light Bar or Single Row 32" Delta Light Bar
- Custom Steel Bracket Kit For Raptor. Updated Design V2.0
- Heat-shrink kit
- Mounting Instructions
- 8mm and 10mm sockets required
- Trim tool/flat head to remove grille and clips
Heat gun for heat-shrink
FITS: NEXT-GEN RAPTOR 2022+
DOES NOT FIT: Next Gen Ranger, XL, XLT, XLS, Sport, Wildtrak or Platinum models.
- Supernova Commander V3.0 32" Light Bar
- ALTIQ Light bar brackets for Next Gen Raptor
- DT Waterproof plug pig tail.
- Heatshrink with inbuilt solder.
- 8MM Socket
- 10mm Spanner
- Heatgun for heatshrink.
- Screw drivers/Trim tool for removing trim pieces.
|LUX DISTANCE||1 LUX @ 878M|
|LENS||GE Lexan Lens 3mm - Indestructible|
|LEDs||60 X Genuine 5W OSRAM P9 Chips|
|FINISH||DuPont Midnight Paint|
|FASTENERS||316L Marine Stainless|
|WATERPROOF RATING||IP68 - IP69K|
|INPUT VOLTAGE||10-30V DC|
|CURRENT DRAW||11.33A @12V|
|INCLUDED WIRING HARNESS||14 Gauge Dual DT Output, Negative and Positive switched headlight compatible|
|COLOUR TEMPERATURE||5700K @ 82+ CRI|
|WEIGHT||2.48KG (including brackets)|
Confidence On Command.