VW Golf MK6 Sequential LED Tail Light Install

VW Golf MK6 Sequential LED Tail Light Install

VW Golf Mk6 Sequential LED Tail Light Instruction - Installation Save on workshop fees by doing it yourself! With only a few basic tools required and a plug n play wiring setup, the installation time mostly consists of running the bridge wire behind the trim panels. The bridge wire provides power for the inner tail light indicator/turn signal light, which is piggy backed off the outer tail light. This installation guide focuses on routing the bridge wire, installation steps for mounting the tail lights can be followed from this guide https://supernovalighting.com.au/mk6-led-tail-lights-installation/ If in doubt, please consult a professional. In the event of improper installation, Supernova Lighting is not responsible for damages or injury. Improper installation may result in damages, fire, injury or death. Recommended Tools 
  • 8mm and 9mm Spanner/Socket
  • Torx T20 Screw Driver
  • Soft Plastic Trim Removal Tool
  • Wire feeding tool

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.